| Automated Two-Electrode Voltage Clamp Systems |
|
- Single and dual channel systems available
- Eliminates microscope
- Manipulators may be used for both patch and oocyte voltage clamp experiments
- High efficiency design
|
|
| Photoconductive Stimulation Chamber System (PSD-1) |
|
- Utilizes photoelectric properties of silicon
- Excitable cells cultured on silicon wafers
- Specific and selective electrical stimulation
- Compatible with imaging and electrophysiology applications
|
|
| Perfusion Pressurization Accessory Kit |
|
- Upgrades any gravity-feed perfusion system to a pressurized system
- Universal reservoir plug fits 5, 10, and 20 ml syringes
- Dual regulators insure uniform fluid delivery
|
|
| Perfusion Chamber with Field Stimulation (RC-49FS) |
|
- O-Ring seal permits quick exchange of coverslips
- Low profile design allows low entry angle electrodes
- Platinum field stimulation electrodes
- Uses popular 18 mm round coverslips
|
|
| Yeast Cell Chamber (YC-1) |
|
- Monitor yeast cell growth using time-lapse microscopy, while changing media
- Cells grow two dimensionally over multiple cell cycles
- Change media in seconds without washing cells out
- Resistive heating or Peltier temperature control options
|
|
| Dual Channel Bipolar Temperature Controller (CL-200) |
|
- Single control temperature adjustment
- Built-in protection for Peltier devices
- Heat loss compensation mode
- Open thermistor fault protection
- Quiet operation
|
|
| Low Profile Parallel Plate Flow chamber (RC-31) |
|
- Adjustable distance between upper and lower coverslips, 50 µm to 350 µm
- Optimal control of culture conditions and cellular environment
- Compatible with both upright and inverted microscopes
- Amenable for long term studies using live cells
|
|
| Low Cost Pico-Injector (PLI-10) |
|
- Femtoliter to microliter injections
- Digital readouts for injection pressure, time, and count
- Reliable optically encoded circuit for injection time set
- Easy to use
|
|
| Ultra Low Noise Air Compressor (Model Air-1) |
|
- Suitable for installation directly at point of use
- Lowest noise and vibration level in the market 45dB(A) - you won't even know it's on!
- Complete compressed air package
- Ideal for use with our microinjection systems
|
|
| Okolab Two Gas Mixer 2GF_Mixer |
|
- We are the Authorized Distributor for Okolab products in the US
- Works with any brand microscope incubator
- CO2 concentration in the 0-15% range
- Reusable PTFE membrane filter
|
|
| Quick Exchange Heated / Cooled Platform for 35 mm Petri Dishes (QE-1HC) |
|
- Designed for use with 35 mm Petri dishes and Series
- 40 quick change imaging chambers
- Open design for easy cell access
- Dish adapters for all major brand 35 mm dishes
- Temperature control from 5° to 50°C
- Magnetic suction and perfusion tube holders
- Magnetic dish clamps
- Available stage adapters for all microscopes
|
|
| Dual Channel Differential Electrometer (HiZ-223) |
|
- 1015Ω Input Resistance
- Designed for measurements with ion-selective microelectrodes
- Probe Test Port
- Standby mode protects input amplifiers
- Driven Guard Shield reduces stray capacity and noise
|
|
