Designed to provide complete environment control for either the Series 40 open bath chambers or 35 mm cell culture dishes.
- Enables imaging, temperature and atmospheric control within the chamber
- Sample perfusion supported in both the open and closed configurations
- Supports Series 40 quick change imaging chambers
- Supports 35 mm cell culture dishes
- Fits both upright and inverted microscopes
- Optional heated top coverslip eliminates condensation in the closed configuration
The DH-40i Microincubator is designed for imaging live cells under constant temperature and atmospheric conditions. This versatile incubation system enables high resolution image analysis, fluorescence microscopy, and time-lapse imaging studies while accommodating both upright and inverted microscopes.
The DH-40i will work, in both its open and closed configurations, with any Warner Series 40 quick change imaging chamber (such as the RC-40LP, RC-41LP, RC-42LP, and the RC-40HP).
In the open configuration, the DH-40i also works with 35 mm cell culture dishes from Falcon, Corning and Willco, and can accommodate RC-37 Series dish inserts. In the closed configuration, the DH-40i also works with the Corning 35 mm cell culture dish using the new disposable RC-33 Series dish inserts. Adapter rings are supplied to insure a close fit for Falcon, Corning and Willco dishes. Clamps are provided to insure good contact between the chamber or dish and the heated surface, and to prevent movement. Both open and closed configurations provide for continuous perfusion of the sample.
The removable top section of the incubator is magnetically held in place and has several sealed ports to allow perfusion, aspiration, and gas atmosphere maintenance. Perfusion and suction tubes can be easily adjusted without disturbing the cell environment. When used in the open configuration, magnetic clamps are supplied to allow entry of perfusion and suction tubes into the unit.
The base section of the DH-40i has a 19 mm diameter aperture and the removable top section features a 40 mm glass aperture. An optional heated top coverslip (HSC-1) eliminates condensation when the DH-40i is used in the closed configuration. Resistive heating of the DH-40i is provided by means of Warner's TC-324B or TC-344B temperature controllers and a CC-28 cable.
The DH-40i microincubator package includes a set of 4 adapter rings, suction and perfusion tubes, magnetic holders, clamps for Series 40 chambers and 35 mm dishes, PE-160 tubing (10 ft.), 1/16. ID Tygon tubing (25 ft.), and 5 replacement 40 mm coverslips.
The DH-40i uses Warner's Series 20 stage adapters which are available for all major microscope models. Custom or modified stage adapters are also available.
Designed to provide complete environment control for either the Series 40 open bath chambers or 35 mm cell culture dishes.
- Enables imaging, temperature and atmospheric control within the chamber
- Sample perfusion supported in both the open and closed configurations
- Supports Series 40 quick change imaging chambers
- Supports 35 mm cell culture dishes
- Fits both upright and inverted microscopes
- Optional heated top coverslip eliminates condensation in the closed configuration
| Order No. |
Model No. |
Description |
Ordering |
| 64-0107 |
TA-29 |
Cable with bead thermistor |
 |
 |
| 64-0106 |
CC-28 |
Cable assembly for heater controllers |
 |
|
| 64-0351 |
AR-6 |
Adapter ring kit for DH-35i or QE-1, fits Willco, Corning, and Falcon dishes, set of 6 |
 |
|
| 64-0757 |
D3512P |
Culture dish, 35 mm/12 mm dish, 20 pack |
 |
|
| 64-0758 |
D3522P |
Culture dish, 35 mm/22 mm dish, 20 pack |
|
| 64-0763 |
D5030B |
Culture dish, 50 mm/30 mm dish, 120 pack |
|
| 64-0764 |
D5040B |
Culture dish, 50 mm/40 mm dish, 120 pack |
|
| 64-0100 |
TC-324B |
TC-324B Heater Controller, single channel |
 |
|
| 64-0101 |
TC-344B |
TC-344B Heater Controller, dual channel |
 |
|
| 64-0102 |
SH-27B |
In-line solution heater |
 |
|
| 64-0103 |
SF-28 |
Slow-Flow in-line solution heater |
|
| 64-1543 |
HCS-1 |
Heated top coverslip for DH-35i and DH-40i chamber |
 |
|
| 64-1544 |
HCS-RPL |
Replacement ITO coverslip for HCS-1 heated chamber top |
 | '
|
| 64-1507 |
RCP-2 |
Replacement Clamps for DH-35i, DH-40i and QE-1 |
 |
|
Reference Articles
- Size-Dependent Cellular Uptake and Expulsion of Single-Walled Carbon Nanotubes: Single Particle Tracking and a Generic Uptake Model for Nanoparticles
Jin H, Heller DA, Sharma R, Strano MS
ACS Nano. 2009 Jan 27;3(1):149-58
- Multimodal optical sensing and analyte specificity using single-walled carbon nanotubes
Heller DA, Jin H, Martinez BM, Patel D, Miller BM, Yeung TK, Jena PV, Höbartner C, Ha T, Silverman SK, Strano MS
Nat Nanotechnol. 2009 Feb;4(2):114-20. Epub 2008 Dec 14
- Protein Kinase KIS Localizes to RNA Granules and Enhances Local Translation
Cambray S, Pedraza N, Rafel M, Garí E, Aldea M, Gallego C
Mol Cell Biol. 2009 Feb;29(3):726-35. Epub 2008 Nov 17
- Cholesterol displacement by ceramide in sphingomyelin-containing liquid-ordered domains, and generation of gel regions in giant lipidic vesicles
Sot J, Ibarguren M, Busto JV, Montes LR, Goñi FM, Alonso A
FEBS Lett. 2008 Sep 22;582(21-22):3230-6. Epub 2008 Aug 26
- Imaging Clathrin Dynamics in Drosophila melanogaster Hemocytes Reveals a Role for Actin in Vesicle Fission
Olexiy Kochubey, Amitabha Majumdar and Jurgen Klingauf
Traffic Volume 7 Issue 12 Page 1614Issue 12 - 1627 - December 2006
 |
Order No. (Model No.) |
|
Product Description |
|
USA Price |
|
Order |
|
|
|
64-0388 (DH-40i) |
|
Culture dish incubation system |
|
Log In |
|
Log In |
|
|
|
Accessories and Replacement Parts |
|
|
64-1543 (HCS-1) |
|
Heated top coverslip for DH-35i and DH-40i chamber |
|
Log In |
|
Log In |
|
|
|
|
|
64-1544 (HCS-RPL) |
|
Replacement ITO coverslip for HCS-1 heated chamber top |
|
Log In |
|
Log In |
|
|
|
|
|
64-0351 (AR-6) |
|
Adapter ring kit for DH-35i or QE-1, fits Willco, Corning, and Falcon dishes, set of 6 |
|
Log In |
|
Log In |
|
|
|
|
|
64-0757 (D3512P) |
|
Culture dish, 35 mm with 12 mm glass, 20 pack |
|
Log In |
|
Log In |
|
|
|
|
|
64-0758 (D3522P) |
|
Culture dish, 35 mm with 22 mm glass, 20 pack |
|
Log In |
|
Log In |
|
|
|
|
|
64-0763 (D5030B) |
|
Culture dish, 50 mm/30 mm dish, 120 pack |
|
Log In |
|
Log In |
|
|
|
|
|
64-0764 (D5040B) |
|
Culture dish, 50 mm with 40 mm glass, 120 pack |
|
Log In |
|
Log In |
|
|
|
|
|
64-1507 (RPC-2) |
|
Replacement clamps for DH-35i, DH-40I, QE-1 |
|
Log In |
|
Log In |
|
|
|
Heating Accessories |
|
|
64-0100 (TC-324B) |
|
TC-324B Heater Controller, single channel |
|
Log In |
|
Log In |
|
|
|
|
|
64-0101 (TC-344B) |
|
TC-344B Heater Controller, dual channel |
|
Log In |
|
Log In |
|
|
|
|
|
64-0106 (CC-28) |
|
Cable assembly for heater controllers |
|
Log In |
|
Log In |
|
|
|
|
|
64-0107 (TA-29) |
|
Cable with bead thermistor |
|
Log In |
|
Log In |
|
|
|
|
|
64-0102 (SH-27B) |
|
In-line Solution Heater |
|
Log In |
|
Log In |
|
|
|
|
|
64-0103 (SF-28) |
|
Slow Flow In-Line Solution Heater |
|
Log In |
|
Log In |
|
|
|
|
|
