- Designed for use with 35 mm Petri dishes and Series
- 40 quick change imaging chambers
- Open design for easy cell access
- Dish adapters for all major brand 35 mm dishes
- Temperature control from 5° to 50°C
- Magnetic suction and perfusion tube holders
- Magnetic dish clamps
- Available stage adapters for all microscopes
The Warner QE-1HC is designed to work with Warner RC-40 quick
change imaging chambers and all 35 mm cell culture dishes.
Precise temperature control of the media is possible when
combined with our low noise CL-100 temperature controller and
TCM-1 Thermal Cooling Module (heat exchanger). An integral
water jacket is used to remove excess heat from the internal Peltier
device.
Magnetic clamps hold cell culture dishes and quick change imaging
chambers securely in place. Magnetic stainless steel along the
perimeter of the platform allows for the use of included magnetic
suction and perfusion tube holders (included).
Fits Series 20 stage adapters. All major microscope stages are
accommodated. Custom or modified stage adapters are also
available; call our Technical Support Department for details.
The QE-1HC is supplied with a 35 mm adapter ring kit- set of six,
three sets of magnetic clamps for holding Petri dishes, one
humidifying cover, one TA-29 bead thermistor, one MAG-3 magnetic
holder for wires, one perfusion tube with magnetic holder, one
suction tube with magnetic holder, 10 feet of PE-160 tubing, 20 feet
of 1/8” ID x 1/4” OD soft tubing, 50 feet of 1/16” Tygon tubing, and a
lift tool.
- Designed for use with 35 mm Petri dishes and Series
- 40 quick change imaging chambers
- Open design for easy cell access
- Dish adapters for all major brand 35 mm dishes
- Temperature control from 5° to 50°C
- Magnetic suction and perfusion tube holders
- Magnetic dish clamps
- Available stage adapters for all microscopes
| Temperature Range |
5° to 50°C |
| Accuracy |
±0.1°C |
| Feedback Thermistor |
Built in Unical 10kΩ at 25°C |
| Controller |
CL-100 Bipolar Controller |
| Physical Dimensions: |
|---|
| Aperture Size |
(D x L) 25.4 mm |
|---|
| Thermal Insert Size |
(D x L x H) 64.0 x 92.2 x 10.5 mm |
| Weight |
105 g |
| Cable Length |
2.4 m |
|---|
| Connector Type |
15 pin Male “D” |
|---|
| Water Jacket Ports |
1/8” Barb Fittings |
|---|
| Warranty |
One Year |
|---|
| Order No. |
Model No. |
Description |
Ordering |
| 64-0107 |
TA-29 |
Cable with bead thermistor |
 |
 |
| 64-1404 |
PT-QE1 |
Perfusion tube for QE-1 quick exchange platform |
 |
|
| 64-1403 |
ST-1QE1 |
Suction Tube, Micro Slit Design for QE-1 quick exchange platform |
 |
|
| 64-1553 |
MAG-6 |
Magnetic clamp for suction tubes, 0.05 in, 18 gauge |
 |
|
| 64-1554 |
MAG-7 |
Magnetic clamp for suction tubes, 0.065 in, 16 gauge |
|
| 64-0297 |
SA-20KZ |
Series 20 stage adapter for Zeiss Axiovert with 85 x 130 mechanical stage |
 |
|
| 64-0296 |
SA-20LZ |
Series 20 stage adapter for use with Zeiss Axiovert with 211 x 230 Specimen Stage, Leica Leitz DMIL with Object Guide, Zeiss Leitz DMIRBE/E with Plane Stage |
 |
|
| 64-0291 |
SA-NIK |
Series 20 stage adapter for Nikon Diaphot/TE200/TE300 |
 |
|
| 64-0295 |
SA-OLY/2 |
Series 20 stage adapter for Olympus IMT-2 / IX50 / IX70 / IX80 / IX81 |
 |
|
 |
Order No. (Model No.) |
|
Product Description |
|
USA Price |
|
Order |
|
|
|
64-1659 (QE-1HC) |
|
Quick exchange stage incubator |
|
Log In |
|
Log In |
|
|
|
|
|
64-0352 (CL-100) |
|
Bipolar temperature controller |
|
Log In |
|
Log In |
|
|
|
|
|
64-1633 (TCM-1) |
|
Thermal cooling module, heat exchanger |
|
Log In |
|
Log In |
|
|
|
Accessories and Replacement parts |
|
|
64-0297 (SA-20KZ) |
|
Series 20 stage adapter for Zeiss Axiovert with 85 x 130 mechanical stage |
|
Log In |
|
Log In |
|
|
|
|
|
64-0296 (SA-20LZ) |
|
Series 20 stage adapter for use with Zeiss Axiovert with 211 x 230 Specimen Stage, Leica Leitz DMIL with Object Guide, Zeiss Leitz DMIRBE/E with Plane Stage |
|
Log In |
|
Log In |
|
|
|
|
|
64-0291 (SA-NIK) |
|
Series 20 stage adapter for Nikon Diaphot/TE200/TE300 |
|
Log In |
|
Log In |
|
|
|
|
|
64-0295 (SA-OLY/2) |
|
Series 20 stage adapter for Olympus IMT2 / IX-50 / IX-70 / IX-80 / IX-81 |
|
Log In |
|
Log In |
|
|
|
|
|
64-0107 (TA-29) |
|
Cable with bead thermistor |
|
Log In |
|
Log In |
|
|
|
|
|
64-1404 (PT-QE1) |
|
Perfusion tube for QE-1 quick exchange platform |
|
Log In |
|
Log In |
|
|
|
|
|
64-1553 (MAG-6) |
|
Magnetic clamp for suction tubes, 0.05 in, 18 gauge |
|
Log In |
|
Log In |
|
|
|
|
|
64-1403 (ST-1QE1) |
|
Suction Tube, Micro Slit Design for QE-1 quick exchange platform |
|
Log In |
|
Log In |
|
|
|
|
|
64-1554 (MAG-7) |
|
Magnetic clamp for suction tubes, 0.065 in, 16 gauge |
|
Log In |
|
Log In |
|
|
|
|
