The Warner QE-1HCis designed to work with Warner QR and RC-40 Series quick release imaging chambers and all 35 mm cell culture dishes. Precise temperature control of the media is possible when combined with our low noise CL-200A or CL-100 temperature controller and the LCS-1 Thermal Cooling Module (heat exchanger). An integral water jacket is used to remove excess heat from the internal Peltier device.
Magnetic clamps hold cell culture dishes and quick change imaging chambers securely in place. Magnetic stainless steel along the perimeter of the platform allows for the use of included magnetic suction and perfusion tube holders (included).
The QE-1HC fits the Series 20 stage adapters. All major microscope stages are accommodated. Custom or modified stage adapters are also available; call our Technical Support Department for details.
The QE-1HC is supplied with a 35 mm adapter ring kit- set of six, three sets of magnetic clamps for holding Petri dishes, one humidifying cover, one TA-29 bead thermistor, one MAG-3 magnetic holder for wires, one perfusion tube with magnetic holder, one suction tube with magnetic holder, 10 feet of PE-160 tubing, 20 feet of 1/8" ID x 1/4" OD soft tubing, 50 feet of 1/16" Tygon tubing, and a lift tool.
|Temperature Range||5 to 65 °C|
|Feedback Thermistor||Built in Unical, 10 kΩ at 25 °C|
|Controller||CL-100A Bipolar Controller|
|OD (D x L x H)||64.0 x 92.2 x 14.5 mm|
|ID (D x H)||40.4 x 13.9 mm|
|Aperture Diameter||25.4 mm|
|Cable Length||2.4 m|
|Connector Type||15 pin male D-sub|
|Water Jacket Ports||1/8" Barb Fittings|
|QE-1HC Quick Exchange Heated / Cooled platform with SC-20: cooling with perfusion.|
|CL-200 Temperature Controller:|
|Set Temperature SC-20||0.0C|
|QE-1HV Plate Set Temperature||0.0C|
|Order No.||Model No.||Product Description||USA Price||Order|
|64-1659||QE-1HC||Quick exchange stage incubator||Login||Login|
|64-1723||CL-200A||Dual Channel Bipolar Temperature Controller||Login||Login|
|64-0352||CL-100||Bipolar temperature controller||Login||Login|
|64-1922||LCS-1||Liquid Cooling Device||Login||Login|
|64-0107||TA-29||Cable with bead thermistor||Login||Login|
|64-1553||MAG-6||Magnetic clamp for suction tubes, 0.05 in, 18 gauge||Login||Login|
|64-1554||MAG-7||Magnetic clamp for suction tubes, 0.065 in, 16 gauge||Login||Login|
|64-1940||DWV||Dedicated Workstation Vacuum||Login||Login|
|64-1403||ST-1QE1||Suction Tube, Micro Slit Design for QE-1 quick exchange platform||Login||Login|
|64-1404||PT-QE1||Perfusion tube for QE-1 quick exchange platform||Login||Login|