Specialized Tools for Electrophysiology and Cell Biology Research

(PLI-10) Low Cost Pico-liter Microinjector

Product Summary

The PLI-10 Pico-Injector reliably delivers ejections from femtoliters to nanoliters through micropipettes by applying a regulated pressure for a digitally set period of time.

  • Femtoliter to microliter injections
  • Digital readouts for injection pressure, time, and count
  • Reliable optically encoded circuit for injection time set
  • Easy to use

The PLI-10 Pico-Injector reliably delivers ejections from femtoliters to nanoliters through micropipettes by applying a regulated pressure for a digitally set period of time.

Pressure to the pipette is controlled precisely through a multi-turn regulator and is reported digitally for reproducibility. Injection time is set using an optically encoded circuit that permits both fine and coarse settings from a single control knob. System timing can be controlled in three ways: push button, foot switch, or external trigger.

Typical applications include large volume injections, extracellular sample delivery, and Xenopus oocyte injections.

Selection Guideline

The PLI-10 comes with a foot switch. Pipette holders are sold separately and can be viewed on the "Pricing & Ordering" tab at the top of this page.

Notes

Input Gas Pressure 75 PSI Recommended, 105 PSI Maximum
Injection Pressure 0.2 to 60 PSI (413 kPa) regulated
Injection Time 0.01 to 99.99 Seconds
Injection Time Accuracy ±0.01% (Crystal Time Base)
Pressure Display 3½ Digits, 0.1 PSI or 1 kPa Resolution
Injection Count Display 0 to 9999 Injections
Trigger Mode Front Panel, Footswitch, TTL (Gate In)
Pressure Monitor Output BNC, Rear Panel, 10 mV/PSI or 1mV/kPa
Power Input External 9VDC @ 400mA (min) Power Supply universal input voltage 90 to 264 VAC
Weight 2.3 kg
Dimensions (HxWxD) 89 x 215 x 175 mm (H x W x D)
Warranty One year, parts & labor

 

Low Cost Pico-Injector (PLI-10)

 

Customers from Europe and Australia can use the Multi Channel Systems - Online Shop to order Warner products or create quotes.

Order No. Model No. Product Description USA Price Order
64-1707 PLI-10 Low cost pico-injector Login Login
Stainless Steel Pipette Holders and Parts
65-0013 PLI-PH1 Stainless Steel Pipette Holder, 130 mm L for 1.0 or 1.5 mm OD Glass Pipettes Login Login
65-0014 PLI-PH1A Stainless Steel Pipette Holder, 80 mm L for 1.0 or 1.5 mm OD Glass Pipettes Login Login
65-0017 PLI-SRG Silicone rubber gasket replacement for use with 1.0 mm glass capillaries (fits PLI-PH-1 & PLI-PH-1A holders), 10.2 cm Login Login
65-0015 PLI-SRG1.5 Silicone rubber gasket replacement for use with 1.5 mm glass capillaries (fits PLI-PH-1 & PLI-PH-1A holders), 10.2 cm Login Login
65-0018 PLI-SSB Stainless Steel Bushing Replacement for use with PLI-PH-1 and PLI-PH-1A Pipette Holders Login Login
65-0019 PLI-PC Stainless Steel Pipette Cap Replacement for use with PLI-PH-1 and PLI-PH-1A Pipette Holders Login Login
65-0020 PLI-HN Stainless Steel Hose Nut Replacement for use with PLI-PH-1 and PLI-PH-1A Pipette Holders Login Login
65-0021 PLI-PH-KIT Pipette holder hardware replacement kit for use with PLI-PH-1 and PLI-PH-1A pipette holders Login Login
65-0022 PLI-PHA Stainless Steel Pipette Holder Adapter (PLI-PH series) for Eppendorf ECET FEMTO-TIP Login Login
Acrylic Pipette Holders
64-1626 AO161.0 Acrylic pipette holder for 1.0 mm pipettes Login Login
64-1627 AO161.2 Acrylic pipette holder for 1.2 mm pipettes Login Login
64-1628 PLI-PPH Acrylic Pipette Holder for 1.5 mm pipettes Login Login
64-1629 AO162.0 Acrylic pipette holder for 2.0 mm pipettes Login Login
Accessories and Replacement Parts
64-0055 MM-33L Micromanipulator with clamp base, left handed Login Login
64-0056 MM-33R Micromanipulator with clamp base, right handed Login Login
64-0057 MM-33LT Micromanipulator with tilt base, left handed Login Login
64-0058 MM-33RT Micromanipulator with tilt base, right handed Login Login
64-0060 MB-B Magnetic base; main pole (12 x 176 mm, D x L), Sub Pole (10 x 165 mm, D x L), 800 N hold force, MM-33 compatible Login Login
65-0029 PLI-FS Foot switch (compatible with PLI-100A, PLI-90A and PLI-10) for inject, hold, fill, gate Login Login
64-1701 AIR-1 Ultra low noise air compressor, 120 VAC/60Hz Login Login

Need support?

Want to know more about our quality products or need assistance in technical support?