Interface cables and thermisitors for connecting Warner temperature controllers to Warner products.
Interface cable with DIN connector for TC-344C and TC-324C temperature controllers.
The CC-28 cable assembly has two thermistors at the platform end: The T1 control thermistor (TS-60P) attaches to the platform and a T2 bead thermistor (TS-70B) is used to monitor the bath temperature.
The CC-28 is primarily used with any Series 20 heater platform to to connect to either a TC-344C or TC-324C temperature controller. The CC-28 will also connect to several other platforms, including the DH-35 and DH-35iL Cell Culture Dish Incubator/Heater , the QE-1 Quick Exchange Platform, or the DH-40iL Cell Culture Dish Incubator/Heater.
Cable with bead thermistor, BNC end, included with most inline solution heaters. Thermistor can be replaced by TS-70B. Thermistor dimensions are 0.85 x 4.6 mm.
Cable with glass bead thermistor, BNC end. Thermistor can be replaced by TS-30G. Thermistor dimensions are 1.2 x 4.6 mm.
Replacement bead thermisitor for CC-28 and TA-29 cables. Thermistor dimensions are 0.85 x 4.6 mm.
Glass bead thermisitor compatible with CC-28 and TA-29 cables. Can replace TS-70B. Thermistor dimensions are 1.2 x 4.6 mm.
Heater blocks for Series P, PH, and Series PM platforms
Replacement heater blocks for Warner platforms>
Non-heater platforms can be converted to heater platforms with an upgrade kit consisting of a pair of resistive heater blocks, heat transfer pads and mounting screws. Tapped holes for the heater blocks are included in all plain platforms. The only tool required for installation is a small Philips screwdriver.
Note: Older platform models may not be upgradable. Consult Warner Technical Support if your platform does not have slots under the 'wings'.
Customers from Europe and Australia can use the Multi Channel Systems - Online Shop to order Warner products or create quotes.
|Order No.||Model No.||Product Description||USA Price||Order|
|64-0106||CC-28||Cable assembly for heater controllers to platform||Login||Login|
|64-0107||TA-29||Cable with bead thermistor||Login||Login|
|64-0108||TA-30||Cable with glass thermistor||Login||Login|
|64-0109||CC-35||Cable assembly for heater controllers, unterminated with tinned leads at platform end||Login||Login|
|64-0303||CC-15||Cable assembly for heater controllers, with tinned leads at connector end||Login||Login|
|64-0270||TS-70B||Replacement bead thermistor for CC-28 Cable||Login||Login|
|64-0269||TS-60P||Replacement probe thermistor for CC-28 cable||Login||Login|
|64-0271||TS-30G||Glass thermistor, alternative to 64-0270 for Series 20 chambers||Login||Login|
|64-0274||RH-2||Heater elements for Warner chambers and platforms, 2 pack||Login||Login|
|64-1506||RPC-1||Replacement platform clamps and screws for P and PH Series platforms, 2 pack||Login||Login|