Designed for multiple successive experiments requiring the fast exchange of #1 or #1.5 round coverslips.
- Dual O-ring seal system enables quick coverslip exchange that's ideal for rapid screening assays
- Open bath design provides excellent access for electrodes and optical objectives to either attached cells or tissue slices
- Anodized aluminum base insures good heat transfer
The Series 40 family of chambers are designed for research involving multiple experimental trials requiring the rapid exchange of round coverslips. The chamber consists of two parts; a polycarbonate top and a 40 mm diameter aluminum base. O-rings are used to seal the coverslip to the polycarbonate chamber and to hold the chamber securely in the aluminum base. Open bath models are designed for electrophysiological recording and/or optical imaging, and are used in applications including patch clamp, Oocyte clamp, and physiological measurements on cell cultures and tissue preparations.
The innovative design of these chambers uses O-rings to seal the coverslip to the polycarbonate chamber, so little or no silicone grease is needed, and mechanical fasteners are not required for coverslip mounting. The RC-40HP high profile open bath chamber uses a 25 mm coverslip to form the chamber bottom. The 6.5 mm tapered sides provide clearance for pipettes, injectors, etc. and allows for a greater bath depth than the RC-40LP.
Series 40 chambers are designed to be compatible with Warner's QE-1 Quick Exchange Platform and DH-35iL and DH-40iL culture dish incubators which are compatible with Warner Series 20 microscope stage adapters.
A temperature controller TC-344C or TC-324C that connects to the heated platform
QE-1 or the microincubators DH-35iL and DH-40iL can be added to set and maintain a certain temperature.
Perfusion can be achieved by adding a VC-8 or VC-6 perfusion system, the
DVW vacuum system takes care of the waste.
The RC-40HP is supplied with one package of 25 mm diameter, #1.5 coverslips.
Designed for multiple successive experiments requiring the fast exchange of #1 or #1.5 round coverslips.
- Dual O-ring seal system enables quick coverslip exchange that's ideal for rapid screening assays
- Open bath design provides excellent access for electrodes and optical objectives to either attached cells or tissue slices
- Anodized aluminum base insures good heat transfer
Model |
Coverslip |
Aperture |
Volume |
RC-40HP |
25 mm |
19.8 mm |
308 µl/mm |
Order No. |
Model No. |
Description |
Ordering |
64-2400 |
TC-324C |
TC-324C Heater Controller, single channel |
 |
 |
64-2401 |
TC-344C |
TC-344C Heater Controller, dual channel |
 |
 |
64-0102 |
SH-27B |
In-line solution heater |
 |
 |
64-0103 |
SF-28 |
Slow-Flow in-line solution heater |
 |
64-0106 |
CC-28 |
Cable assembly for heater controllers |
 |
 |
64-0107 |
TA-29 |
Cable with bead thermistor |
 |
 |
64-1491 |
OR-1 |
Replacement o-ring for RC-40LP and RC-40HP, 5 pack, red |
 |
 |
64-1492 |
OR-2 |
Replacement Retaining Ring o-ring for all RC-40 Series, 5 pack, black |
 |
 |
 |
Order No. (Model No.) |
 |
Product Description |
 |
USA Price |
 |
Order |
 |
Chamber |
 |
 |
64-0370 (RC-40HP) |
 |
Quick change chamber for 25 mm coverslips, high profile |
 |
Log In |
 |
|
 |
 |
 |
Glass Coverslips |
 |
 |
64-0705 (CS-25R) |
 |
Round cover glass, #1 thickness, 25 mm, 100 pack |
 |
Log In |
 |
|
 |
 |
 |
 |
 |
64-0715 (CS-25R15) |
 |
Round cover glass, #1.5 thickness, 25 mm, 100 pack |
 |
Log In |
 |
|
 |
 |
 |
Microincubators & Platforms |
 |
 |
64-0388 (DH-40iL) |
 |
Culture dish incubation system |
 |
Log In |
 |
|
 |
 |
 |
 |
 |
64-0349 (DH-35iL) |
 |
Culture dish incubation system |
 |
Log In |
 |
|
 |
 |
 |
 |
 |
64-0375 (QE-1) |
 |
Quick change platform, heated base, for RC-40 and QR-40 series chambers |
 |
Log In |
 |
|
 |
 |
 |
Temperature Control |
 |
 |
64-2401 (TC-344C) |
 |
Heater controller, dual channel, 110-230 VAC, 50/60Hz |
 |
Log In |
 |
|
 |
 |
 |
 |
 |
64-2400 (TC-324C) |
 |
Heater controller, single channel, 110-230 VAC, 50/60Hz |
 |
Log In |
 |
|
 |
 |
 |
 |
 |
64-0102 (SH-27B) |
 |
In-line solution heater |
 |
Log In |
 |
|
 |
 |
 |
 |
 |
64-0103 (SF-28) |
 |
Slow flow in-line solution heater |
 |
Log In |
 |
|
 |
 |
 |
 |
 |
64-0106 (CC-28) |
 |
Cable assembly for heater controllers to platform |
 |
Log In |
 |
|
 |
 |
 |
 |
 |
64-0107 (TA-29) |
 |
Cable with bead thermistor |
 |
Log In |
 |
|
 |
 |
 |
 |
 |
64-1921 (SA-40PS1) |
 |
Adapter Ring for Pecon Heating Insert P |
 |
Log In |
 |
|
 |
 |
 |
Accessories & Replacement Parts |
 |
 |
64-1491 (OR-1) |
 |
Replacement o-ring for QR/RC-40LP & QR/RC-40HP, 5 pack, red |
 |
Log In |
 |
|
 |
 |
 |
 |
 |
64-1492 (OR-2) |
 |
Replacement Retaining Ring o-ring for all RC-40 Series, 5 pack, black |
 |
Log In |
 |
|
 |
 |
 |
|