We are the Authorized Distributor for Okolab products in the US
Controls O2 by mixing air with N2
Zirconium oxide O2 sensor
Sensor life 10 years
Digital/Manual and Bold Line controllers
Bold Line O2 Controller
The Bold Line O2 unit controls the oxygen concentration over the range of 1- 20% by mixing Air with Nitrogen.
The Bold Line O2 unit controls the oxygen concentration over the range of 1- 20% by mixing Air with Nitrogen. Gas flow rates are digitally controlled. A long life zirconium oxide sensor precisely measures the O2 concentration with great accuracy.
Operation is via an easy to use touch screen interface, OKO-Touch. An optional Smart Box data logger and web server allows operation via any web-enabled device. The system may also be operated via a PC using OKOControl
2.0 software, or NIS-Elements software.
Sensor calibration is made with an external meter or calibration gas. The controller can be attached to CO2 Unit-BL to control both CO2 and O2.
The Oko Touch is necessary for operation of the bold line controller.
Digital Gas / Manual Air Mixers (O2 DGT-BX Hypoxia)
Adds N2 in Air
O2 Range 1-19%
Accuracy: ± 0.1% at 5% O2
Repeatability: better than 0.05% of O2
Floating ball air flow meter 0-0.4 Nl/min
Total flow rate (at 5% O2) 0.5 Nl/min
Outlet pressure: ambient
N2 consumption (at 5% O2) 0.5 Nl/min
O2 sensor Zirconium oxide with 10 year life
Software control with OKO Control or NIS-Elements
Filtering device PTFE membrane with 0.2 ìm pores
Works in series with CO2 DGT BX
The O2 DGT-BX HYPOXIA controls Oxygen concentration by mixing Air with Nitrogen. Air flow is set to 0.1 liter per minute by means of a floating ball flowmeter. When combined with the Digital CO2 Controller, you have control over 3 gas Mixtures (Nitrogen-Carbon Dioxide-Oxygen).
The long life zirconium oxide sensor lasts up to 10 years if continuously used and considerably longer if used intermittently.
The serial RS-232 interface and Oko-Contol software allow the user to control the unit and to acquire and store concentration data on a PC compatible computer.
The O2 controller is supplied with the following: gas filter, pressure gauge for N2 with regulator, two white rigid tubes: 6mm O.D., 3m length
Optional Air Pump is a good choice for labs lacking a source of clean air.